Tel:
Shenzhen Yanhua Faith Technology Co., Ltd.
Shenzhen Yanhua Faith Technology Co., Ltd.

Best Diaphragm Pump Provider!

Home ProductsBrushless Diaphragm Pump

16L/M Flow Dc 12 Volt Air Vacuum Pump , Miniature Suction Pump 40kpa Pressure

16L/M Flow Dc 12 Volt Air Vacuum Pump , Miniature Suction Pump 40kpa Pressure

  • 16L/M Flow Dc 12 Volt Air Vacuum Pump , Miniature Suction Pump 40kpa Pressure
  • 16L/M Flow Dc 12 Volt Air Vacuum Pump , Miniature Suction Pump 40kpa Pressure
  • 16L/M Flow Dc 12 Volt Air Vacuum Pump , Miniature Suction Pump 40kpa Pressure
16L/M Flow Dc 12 Volt Air Vacuum Pump , Miniature Suction Pump 40kpa Pressure
Product Details:
Place of Origin: China
Brand Name: Feiyinsi
Certification: Rohs,Reach
Model Number: DWX512-2403-4800
Payment & Shipping Terms:
Minimum Order Quantity: 50pcs
Price: Negotiable
Packaging Details: Export carton, carton's dimension:47*31*25cm
Payment Terms: Western Union, , T/T, L/C,paypal
Supply Ability: 3000pcs per day
Contact Now
Detailed Product Description
Basic Materials: PC/PPS/Nylon, EPDM,hardware Structure: Diaphragm Pump
Usage: Air Or Vacuum Theory: Vacuum
Power: Electric Motor: DC Motor
Pump's Name: Brushless Diaphragm Beauty Pump Brush Or Brushless: Brushless
Vacuum And Pressure: -75kpa Vacuum And 240kpa Pressure Model: DWX512-2403-4800
High Light:

brushless air pump

,

miniature electric vacuum pump

16L/M flow dc good consistency brushless diaphragm beauty pump

 

 

Judging the working condition of exhaust end of brushless diaphragm beauty pump

 

The above problem is to discuss the suction end resistance of the pump. According to these conditions, the range of selection has been reduced, but the problem of exhaust end resistance must be considered. In this way, the optional range can be determined.

In practical application, the exhaust condition of the micro vacuum pump is different: one is that the exhaust is very smooth and goes straight to the atmosphere; the other is the high exhaust resistance, such as valves, small bends, and large damping sensors on the exhaust pipe road, Non-specific silencers, exhaust below liquid level, gas to airtight or semi-closed containers, etc. In modern design and manufacture, the micro vacuum pump with different exhaust conditions is treated differently. " The parameter of the maximum resistance Por value "is to calibrate the exhaust capacity of the pump, so we can use strict technical means to determine whether the type selection is appropriate or not."

According to the above steps, we have been able to determine the selection range of the micro pump. The allowance should be left for the selection of the attention parameters, especially the flow parameters. After the pump is connected to the gas path system, the pressure loss will be caused by the pipeline, valve and other gas elements, so the flow rate is smaller than the nominal flow rate of the pump, and some problems related to the selection of the pump are listed below, which are considered according to the application situation.

 

brushless diaphragm beauty pump's parameter and features

 

1. Uncontaminated flow.

2. Non-metallic construction.

3. Oil-Free, Corrosion resistant

4. Long life,High efficiency

5. Compact size, Low Weight

6. Low noise level&vibration

7. Maintenance free

8. High level of water tightness thanks to the closed

diaphragm surface and special sealing system.

9. Can operate in any installed position.

 

Model

DWX512-2403-4800

Size(mm)

102.4*70*40

Voltage(V/DC)

6V/9V/12V/24V

Power(W)

10

Free Flow(L/M)

16

Pressure(Kpa)

240

Vacuum(Kpa)

-75

Weight

300

 

Remark: Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.

 

 

Electrical Performance about brushless diaphragm beauty pump

 

Number Item requirements
1

Insulation resistance

 

10MΩ / between wire and frame measurements , 500VDC / min

 

2 Dielectric strength 5mA Max/between wire and frame measurements 500 VAC/min

 

environmental testing requirements about brushless diaphragm beauty pump

 

Number Item Test conditions and requirements Remarks
1 Steady-state heat and wet 60%rh High humidity can affect the electrical performance of the motor
2 Temperature Shock The pump was placed at -20 ℃ environment ,after 1h immediately placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After 50 cycles was returned to room temperature.0.5h later,pumping power test is conducted. The pump should be able to work properly; fasteners should not loose , in working condition pump’s body should not be leakage when block pump’s outlet. too high temperature affect pump’s parameters, life and electrical performance
3 High temperature test Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After 0.5hours later, at room temperature power pump. Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change.  
4 Low temperature test For 72 hours,pump is at -20 ℃ environment. Then take it out. Power the pump and test it.( when testing the pump,pump’s body can not have ice ). Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change.

In too low temperature,motor cannot be started

 

 

Environmental Requirements about battery operated diaphragm pump

 

  Working Environment

Storage Environment

 

Transportation Environment

 

Temperature Range

 

-30℃~66℃ -30℃~70℃ -30℃~70℃/Smooth

Relative humidity range

 

60%rh 60%rh 60%rh

 

 

Special requirements for materials about battery operated diaphragm pump

 

All materials comply with environmental standards.

Motors comply with EMC.

pump material is nonflammable or any fire should be fully extinguish within 30

seconds under 10 seconds of ignition test.

 

battery operated diaphragm pump's dimension

 

16L/M Flow Dc 12 Volt Air Vacuum Pump , Miniature Suction Pump 40kpa Pressure 0

Unlabeled tolerance is ± 0.1mm.

Pump Size:102.4*70*40mm

Pump Weight:300g;

Outlet:OD 5mm, silicone hose suggestion:ID 3.5mm

Materials:pump body: PC/PPS, diaphragm: EPDM

Because we use imported ball bearing,the pump’s performance is stable and high.

The membrane is made by EPDM and pump's body is made by special PC/PPS which make pump well endurance and strong chemical resistance.

 

More details about battery operated diaphragm pump

 

An elastomeric diaphragm can be used as a versatile dynamic seal that removes many of the limitations found with other sealing methods. They do not leak, offer little friction, and can be constructed for low pressure sensitivity. With the right material consideration, diaphragms can seal over a wide range of pressures and temperatures without needing lubrication or maintenance.

 

 

Our company offers multiple component configurations allowing pump to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliable, highly efficient.

Its flow can deliver up to 3 L/min and 18L/M.

Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .

When you choose pump, you can tell me the pump's voltage you need.

We can do it for you.

You can choose pump according to our model.

In addition,it can be mounted in any position.

 

 

battery operated diaphragm pump's packing and shipping

 

Packaging:

CTN/PCS: 60PCS

G.W. : 19.5 KG

DIMENSION : 47 * 31 * 25 CM

1.The stock samples can be sent to you within 3-5 days by international express after received

2.The batch order can be shipped to you in about 30-40days after order confirmation (by air or by

sea)

 

 

Company Information

 

Our mold department and injection department is very matured.

We do mold and plastic injection for more than 20years.

We devote to 20% profit to R & D department, so we have more than 20 patent in research dc micro pump. Our engineers has over 15years professional experience in dc micro pump.

All products of the company have independent intellectual property rights and patents. We can independently design and produce.

Founded in 1999,yanhua Micro pump Technology company is the leading and biggest manufacturer specializing in various DC micro pump and fluid comprehensive solution in China.

Our sale engineers team have more than 16years customers’ service customer and 15years overseas experience in customer service.

 

 

FQA

 

Q1: Can I have a sample order for it?

A: Warmly welcome of sample order to test and check quality. Mixed samples are acceptable.

Q2: What about the lead time?

A: Sample needs 3-5 days, mass production time needs 1-2 weeks, if bulk qty need about 20-25workdays.

Q3: How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q4: How to proceed an order?

Firstly let us know your requirements or application.

Secondly We quote according to your requirements /our recommend model with suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q5: What's your payment terms?

A: T/T & L/C, small amount accept paypal. Big amount ok for 30% down payment & balance against copy bill of loading.For more need, please just contact us and we will reply within 24hours on working days.

Q6. Is it OK to print my logo on this product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 6-12 months warranty to our products & 1% wear out parts for after service.

Q8: What’s your main marker?

A: North America, Korea & European

Q9: Do you have ability to do ODM service?

A1: Warmly welcome your ODM requirement based on our production line and our R&D team with more than 16 years experience on pump& motors.

A2: ODM service based on offered sample. B:Oo modify & creative new function based on our product series.

Q10. Do you have any MOQ limit for led light order?

A. No MOQ, 1pc for sample checking is available.

Contact Details
Shenzhen Yanhua Faith Technology Co., Ltd.

Contact Person: Emily

Tel: +8618575594727

Send your inquiry directly to us
Shenzhen Yanhua Faith Technology Co., Ltd.
5th floor, Zhongpeng Building, Zhongpengcheng Industrial Park,The 4th Industrial Zone of Heshuikou, Gongming Street, Guangming New District, Shenzhen, China
Tel:86-755-23696244
Mobile Site Privacy Policy China Good Quality Mini Diaphragm Pump Supplier. © 2018 - 2021 electric-diaphragmpump.com. All Rights Reserved.