|Place of Origin:||China|
|Minimum Order Quantity:||50pcs|
|Packaging Details:||Export carton, carton's dimension:47*31*25cm|
|Payment Terms:||Western Union, , T/T, L/C,paypal|
|Supply Ability:||3000pcs per day|
|Color:||Grey||Basic Materials:||PC/PPS/Nylon, EPDM,hardware|
|Structure:||Diaphragm Pump||Usage:||Air Or Vacuum|
|Pump's Name:||Brushless 12v Dc Pump||Brush Or Brushless:||Brushless|
|Vacuum And Pressure:||-55kpa Vacuum And 110kpa Pressure||Weight:||300g|
mini air vacuum pump,
miniature electric vacuum pump
5L/M flow 110kpa pressure mini brushless 12v dc diaphragm pump
brushless 12v dc pump's parameter and features
1. Uncontaminated flow.
2. Non-metallic construction.
3. Oil-Free, Corrosion resistant
4.Long life,High efficiency
5. Compact size, Low Weight
6. Low noise level&vibration
7. Maintenance free
8. High level of water tightness thanks to the closed
diaphragm surface and special sealing system.
9. Can operate in any installed position.
Our company offers multiple component configurations allowing pump to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliable, highly efficient.
Its flow can deliver up to 3 L/min and 18L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
Environmental Requirements about brushless 12v dc pump
Relative humidity range
Electrical Performance about brushless 12v dc pump
10MΩ / between wire and frame measurements , 500VDC / min
|2||Dielectric strength||5mA Max/between wire and frame measurements 500 VAC/min|
environmental testing requirements about 12v brushless vacuum pump
|Number||Item||Test conditions and requirements||Remarks|
|1||Steady-state heat and wet||60%rh||High humidity can affect the electrical performance of the motor|
|2||Temperature Shock||The pump was placed at -20 ℃ environment ,after 1h immediately placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After 50 cycles was returned to room temperature.0.5h later,pumping power test is conducted. The pump should be able to work properly; fasteners should not loose , in working condition pump’s body should not be leakage when block pump’s outlet.||too high temperature affect pump’s parameters, life and electrical performance|
|3||High temperature test||Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After 0.5hours later, at room temperature power pump. Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change.|
|4||Low temperature test||For 72 hours,pump is at -20 ℃ environment. Then take it out. Power the pump and test it.( when testing the pump,pump’s body can not have ice ). Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change.||In too low temperature,motor cannot be started|
Special requirements for materials about 12v brushless vacuum pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully extinguish within 30
seconds under 10 seconds of ignition test.
Load start-up problem.
If there is a vacuum or pressure in the exhaust port of the micro air pump before starting, another technical parameter of the pump should be considered: the maximum starting load Pis value of the intake port and the maximum starting load Pos value of the exhaust port. The typical application example is to use the micro air pump to maintain the vacuum or positive pressure state in the container. When the vacuum or positive pressure in the container is lower than the set value, the pump needs to be electrified to start and stop when the pressure is higher than the set value. The performance of the manufacturer requires a high level of technology.
brushless 12v dc pump's dimension
Unlabeled tolerance is ± 0.1mm.
Outlet:OD 5mm, silicone hose suggestion:ID 3.5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is stable and high.
The membrane is made by EPDM and pump's body is made by special PC/PPS which make pump well endurance and strong chemical resistance.
More details about brushless 12v dc pump
brushless 12v dc pump's photo
Working principle: the rotary motion of the motor turn into the swing of connecting rod which makes the diaphragm up and down motion. In the process of the downward movement of the diaphragm, pump cavity will suck medium through the inlet valve; Upward movement of the diaphragm, pump cavity press out media through the outlet valve. Mechanical transmission parts and pump cavity is isolated by diaphragm. Diaphragm pump does not need oil for auxiliary lubricating, in the process of transmission, extraction and compression of medium.
brushless 12v dc pump's packing and shipping
G.W. : 19.5 KG
DIMENSION : 47 * 31 * 25 CM
Picture’s about the packaging
1.We can ship by DHL, UPS, FedEx ,TNT, EMS, HONGKONG post etc.DHL, UPS, FedEx, TNT takes about 3-5 workdays for delivery.
2.And we will help choose the most cost-effective way for you according to your requirement.
3.The tracking number will be available the next day after shipment,then you can check your goods is on the way.
12v brushless vacuum pump's model code
According to above picture, you know how our model codes are produced.
You can know our pump more clearly and choose the pump more easily.
We have obtained the ISO9001 certification, and our products comply with the EU RoHS Directive and REACH regulations, FDA certification. Some of our products have WARS, NSF approval.
Today, Yanhua have 12 production lines and 300 skilled workers, our monthly production capacity is 500,000pcs brushless and brush dc pumps,100,000 piston pumps and 10,000 gear pump and water pump.
Founded in 1999, Yanhua faith is concentrated on mold and plastic injection first.
In 2001, we start our own assemble line to produce pumps.
In 2002, we have our own sales team.
In 2003, we have our over-sales team.
From 2010, we start our own patent, now we have more than 20 patents.
In 2010, yanhua company has passed ISO9001 certification
In 2011years, we have our own trademark”Feinyinsi”.
Today, Yanhua have 12 production lines and 300 skilled workers, our monthly producton capacity is 500,000pcs brushless and brush dc pumps,100,000 piston pumps and 10,000 gear pump and water pump.
The company consists of a professional design department, mold department, injection department , assembling workshop and sales department.
Our mold department and injection department is very matured.
We do mold and plastic injection for more than 20years.
Q1: Are you a factory or trading company?
A1: We are a factory.
Q2: Can I get a sample? How long it will take to get a sample?
A2: Yes, you can order sample to test and check the quality.
For our usual sample, the sample lead time is about 3-5days.
If special sample, it will take a longer time for design and order materials to do pumps.
All our samples are done by our engineers.
They can according to your needs customize pump for you.
Q3: How can I make the payment?
A3:Payment can be made through T/T, paypal or Western Union.
Q4: Is it OK to print our logo on Pump?
A4: Yes, we could do OEM and print your logo on Pump product.
Q5: What about the package ?
A5: Standard export carton.
Q6.: The use of products have?
A6:The pump can pump various strong acid, alkali and corrosive air etc.
Q7: How product quality and service?
A7: Our pump have CE certificate, quality assured and provide various personalized needs.
Q8: How to proceed an order for Mini Air Pump?
A8: (1) Checking /confirming all details information( include requirement of pump product, payment terms, price,quantity, leading time or others);
(2) Checking/confirming the sample's quality or satisfied result;
(3) Final checking/confirming the price/quantity/leading time/payment terms for first trial order;
(4) We factory arrange the production after receiving the real pump order.
Contact Person: Emily