|Place of Origin:||China|
|Minimum Order Quantity:||50pcs|
|Packaging Details:||Export carton, carton's dimension:47*31*25cm|
|Payment Terms:||Western Union, , T/T, L/C,paypal|
|Supply Ability:||3000pcs per day|
|Working Way:||Continuous Or Intermittent||Usage:||Air Or Vacuum|
|Pressure:||120kpa Pressure||Motor:||DC Motor|
|Model:||D312-1204-3700||Pump's Name:||12 Volt Dc Vacuum Pump|
micro diaphragm liquid pump,
miniature diaphragm vacuum pump
Battery powered transfer cheap mini diaphragm 12 volt dc vacuum pump
how to choose pump?
In short, the gas sampling pump can only carry a small load (i.e., the pump suction end’s resistance can not be too big, but the price is cheap; in the strict sense, the miniature vacuum pump can carry a large load (the suction end allows large resistance, or even completely clogged up, but the price is slightly higher. The resistance of the pump can be measured by means of instrument. Comparing it with the por of maximum allowable resistance of air inlet in the pump's technical parameter, we can know whether the type selection is appropriate or not. It is usually determined by a simple method based on experience. For example, the following conditions are of high load (that is, the pumping end of the pump has greater resistance and can only be selected within the scope of the miniature vacuum pump):
1.At the pumping end of the pump to be connected to a very long pipe, or pipe bending points, severe bending will even block closed, or the pipe has a very small hole (for example, less than φ 2 mm);
2.There are throttle valves, solenoid valves, air path switches, filters and other components on the pipeline;
3.The pump outlet is connected with the closed container, or the container is not airtight but the air intake is small;
4.The pump outlet is connected with the closed container, or the container is not airtight but the air intake is small;
5.The pumping end of the pump is connected to the filter container, which is used to speed up liquid filtration.
12 volt dc vacuum pump's parameter and features
1. Small and powerful
2. Extreme chemical resistance
3. Brush and brush-less direct current motor for selection
4. Dry running, durable and maintenance free
5. Self-priming and excellent for pressure
6. Low noise, longer endurance lifetime than other normal membrane pump
Remark: Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
12 volt dc vacuum pump's dimension
Unlabeled tolerance is ± 0.1mm.
Outlet:OD 5.8mm, silicone hose suggestion:ID 4.5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is stable and high.
The membrane is made by EPDM and pump's body is made by special PC/PPS which make pump well endurance and strong chemical resistance.
environmental testing requirements about 12 volt dc vacuum pump
|Number||Item||Test conditions and requirements||Remarks|
|1||Steady-state heat and wet||60%rh||High humidity can affect the electrical performance of the motor|
|2||Temperature Shock||The pump was placed at -20 ℃ environment ,after 1h immediately placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After 50 cycles was returned to room temperature.0.5h later,pumping power test is conducted. The pump should be able to work properly; fasteners should not loose , in working condition pump’s body should not be leakage when block pump’s outlet.||too high temperature affect pump’s parameters, life and electrical performance|
|3||High temperature test||Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After 0.5hours later, at room temperature power pump. Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change.|
|4||Low temperature test||For 72 hours,pump is at -20 ℃ environment. Then take it out. Power the pump and test it.( when testing the pump,pump’s body can not have ice ). Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change.||In too low temperature,motor cannot be started|
Electrical Performance about 12 volt dc vacuum pump
10MΩ / between wire and frame measurements , 500VDC / min
|2||Dielectric strength||5mA Max/between wire and frame measurements 500 VAC/min|
Special requirements for materials about 12 volt dc vacuum pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully extinguish within 30
seconds under 10 seconds of ignition test.
12 volt dc vacuum pump's production process
Our company has a complete production system.
We has our own mold department, injection molding department, production and
assembly department, sample room, R & D department, sales department.
We can independently design and produce pump.
In addition, we can assemble productions in strict accordance with the ISO9001 system.
12 volt dc vacuum pump's application
Our products can meet the specific needs of different clients. The products are mainly used in medical cosmetology, household electronic appliances, food and beverage, health,instrument,chemical instrumentation. The car and laboratory and other industries. The products are mainly exported to korea, Japan,southeast Asia, Australia, Europe and other countries.
12 volt dc vacuum pump's packing and shipping
G.W. : 12 KG
DIMENSION : 47 * 31 * 25 CM
We can ship pumps to you by sea, by air or by express.
By sea: cheap but long
By air: quick but a a little expensive
By express: door to door, 3-5days to your country by DHL/UPS/FEDEX/TNT and others.
The fastest, but most expensive.
You can choose according to your needs.
Our company offers multiple component configurations allowing piston pump to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliable, highly efficient.
Its flow can deliver up to 3 L/min and 8L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
The company consists of a professional design department, mold department, injection department , assembling workshop.
All products of the company have independent intellectual property rights and patents. We can independently design and produce. In addition, we can assemble productions in strict accordance with the ISO9001-2015 system. The company has passed ISO9001 certification. "Feiyinsi" is a registered trademark of our company .Based on the soul purpose "we are implementing the principle of “quality and service is the first” all the time, taking the highest industry standard to control every procedure.
All products of our company have independent intellectual property rights and patents.
We have all kinds of certification, such as Rohs,CE and Reach.
Q1: Can I have a sample order for it?
A: Warmly welcome of sample order to test and check quality. Mixed samples are acceptable.
Q2: What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks, if bulk qty need about 20-25workdays.
Q3: How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q4: How to proceed an order?
Firstly let us know your requirements or application.
Secondly We quote according to your requirements /our recommend model with suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q5: What's your payment terms?
A: T/T & L/C, small amount accept paypal. Big amount ok for 30% down payment & balance against copy bill of loading.For more need, please just contact us and we will reply within 24hours on working days.
Q6. Is it OK to print my logo on this product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 6-12 months warranty to our products & 1% wear out parts for after service.
Q8: What’s your main marker?
A: North America, Korea & European
Q9: Do you have ability to do ODM service?
A1: Warmly welcome your ODM requirement based on our production line and our R&D team with more than 16 years experience on pump& motors.
A2: ODM service based on offered sample. B:Oo modify & creative new function based on our product series.
Q10. Do you have any MOQ limit for led light order?
A. No MOQ, 1pc for sample checking is available.
Contact Person: Emily