Home ProductsBrushless Diaphragm Pump

Electric Ink Printer Micro Diaphragm Water Pump Brushless 1m Suction Height Low Heat

Electric Ink Printer Micro Diaphragm Water Pump Brushless 1m Suction Height Low Heat

    • Electric Ink Printer Micro Diaphragm Water Pump Brushless 1m Suction Height Low Heat
    • Electric Ink Printer Micro Diaphragm Water Pump Brushless 1m Suction Height Low Heat
    • Electric Ink Printer Micro Diaphragm Water Pump Brushless 1m Suction Height Low Heat
  • Electric Ink Printer Micro Diaphragm Water Pump Brushless 1m Suction Height Low Heat

    Product Details:

    Place of Origin: China
    Brand Name: Feiyinsi
    Certification: Rohs,Reach
    Model Number: SW312-303-3200

    Payment & Shipping Terms:

    Minimum Order Quantity: 50pcs
    Price: Negotiable
    Packaging Details: Export carton, carton's dimension:47*31*25cm
    Payment Terms: Western Union, , T/T, L/C,paypal
    Supply Ability: 3000pcs per day
    Contact Now
    Detailed Product Description
    Color: Grey Basic Materials: PC/PPS/Nylon, EPDM,hardware
    Structure: Diaphragm Pump Usage: Water Or Ink
    Size: 32.8*50*70mm Theory: Vacuum
    Power: Electric Motor: DC Motor
    Pump's Name: Ink Printer Brushless Water Pump Brush Or Brushless: Brushless
    Suction Height: 1m Weight: 160g
    Model: SW312-303-3200 Lift: 2m

    Long life span, low heat electric diaphragm ink printer brushless water pump

     

     

    Brushless DC Pump uses the principle of permanent magnet brushless DC motor which are built-in circuit board, the housing structure designed to form the chamber for operating fluid flow, characterized by security, because there is no brush friction, so there is no spark; high efficiency, low power consumption (energy-efficient, effective power of 70%) than brush motors and long life , low noise.

     

    ink printer brushless water pump's parameter

     

    Brushless DC Pump uses the principle of permanent magnet brushless DC motor which are built-in circuit board, the housing structure designed to form the chamber for operating fluid flow, characterized by security, because there is no brush friction, so there is no spark; high efficiency, low power consumption (energy-efficient, effective power of 70%) than brush motors and long life , low noise.

     

    Model

    SW312-303-3200

    Size(mm)

    32.8*50*70

    Voltage(V/DC)

    6V/9V/12V/24V

    No-load current(mA)

    100

    Free Flow(L/M)

    0.8

    Load current(mA)

    240

    Vacuum(Kpa)

    -30

    Lift(m) 2
    suction height(m) 1

    Weight

    160

     

    Our company offers multiple component configurations allowing pump to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliable, highly efficient.

    Its flow can deliver up to 0.2 L/min and 1L/M.

    Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .

    When you choose pump, you can tell me the pump's voltage you need.

    We can do it for you.

    You can choose pump according to our model.

    In addition,it can be mounted in any position.

     

     

    Environmental testing requirements about ink printer brushless water pump

     

    Number Item Test conditions and requirements Remarks
    1 Steady-state heat and wet 60%rh High humidity can affect the electrical performance of the motor
    2 Temperature Shock The pump was placed at -20 ℃ environment ,after 1h immediately placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After 50 cycles was returned to room temperature.0.5h later,pumping power test is conducted. The pump should be able to work properly; fasteners should not loose , in working condition pump’s body should not be leakage when block pump’s outlet. too high temperature affect pump’s parameters, life and electrical performance
    3 High temperature test Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After 0.5hours later, at room temperature power pump. Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change.  
    4 Low temperature test For 72 hours,pump is at -20 ℃ environment. Then take it out. Power the pump and test it.( when testing the pump,pump’s body can not have ice ). Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change. In too low temperature,motor cannot be started
     

     

     

    Environmental Requirements about ink printer brushless water pump

     

      Working Environment

    Storage Environment

     

    Transportation Environment

     

    Temperature Range

     

    -30℃~66℃ -30℃~70℃ -30℃~70℃/Smooth

    Relative humidity range

     

    60%rh 60%rh 60%rh

     

    Electrical Performance about ink printer brushless water pump

     

    Number Item requirements
    1

    Insulation resistance

     

    10MΩ / between wire and frame measurements , 500VDC / min

     

    2 Dielectric strength 5mA Max/between wire and frame measurements 500 VAC/min
     

     

    Special requirements for materials about ink printer brushless water pump

     

    All materials comply with environmental standards.

    Motors comply with EMC.

    pump material is nonflammable or any fire should be fully extinguish within 30

    seconds under 10 seconds of ignition test.

     
    ink printer brushless water pump's application

    Our products can meet the specific needs of different clients. The products are mainly used in medical cosmetology, household electronic appliances, food and beverage, health,instrument,chemical instrumentation. The car and laboratory and other industries. The products are mainly exported to korea, Japan,southeast Asia, Australia, Europe and other countries.

     

    ink printer brushless water pump's packing and shipping

     

    Packaging:

    CTN/PCS: 75PCS

    G.W. : 12 KG

    DIMENSION : 47 * 31 * 25 CM

    We can ship pumps to you by sea, by air or by express.
    By sea: cheap but long
    By air: quick but a a little expensive
    By express: door to door, 3-5days to your country by DHL/UPS/FEDEX/TNT and others.

    The fastest, but most expensive.
    You can choose according to your needs.

     

    Company Information

     

    Founded in 1999, Yanhua faith is concentrated on mold and plastic injection first.

    In 2001, we start our own assemble line to produce pumps.

    In 2002, we have our own sales team.

    In 2003, we have our over-sales team.

    From 2010, we start our own patent, now we have more than 20 patents.

    In 2010, yanhua company has passed ISO9001 certification

    In 2011years, we have our own trademark”Feinyinsi”.

    Today, Yanhua have 12 production lines and 300 skilled workers, our monthly producton capacity is 500,000pcs brushless and brush dc pumps,100,000 piston pumps and 10,000 gear pump and water pump.

    The company consists of a professional design department, mold department, injection department , assembling workshop and sales department.

    Our mold department and injection department is very matured.

    We do mold and plastic injection for more than 20years.

    Contact Details
    Shenzhen Yanhua Faith Technology Co., Ltd.

    Contact Person: Emily

    Tel: +8613430847672

    Send your inquiry directly to us (0 / 3000)